FTS 7" Lift Kit 2001-2010 GM 2500HD 3500HD

Part# 85102

$1,954.98 Includes Free Shipping.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.Ca.Gov

Full Throttle Suspension 7" Lift Kit

Fits 2001-2010 Chevy/GMC 2500HD / 3500HD Non Dually

Part# 85102

Free Standard freight is only to the lower 48  states.  International, HI, and AK, orders will require an additional shipping charge before order is shipped.

This FTS 7" Suspension Lift Kit carries a lifetime warranty against any manufactures defects.  FTS uses a 100% bolt on kit that does not extend the track width of the front suspension, by dropping the front differential FTS is able to maintain the proper CV axle angles to ensure smooth and reliable operation.  Fabricated steel blocks lift up the rear of the truck utilizing grade 8 u-bolts for straight forward installation. The high quality gloss black powdercoat will look good and hold up to just about anything you can throw at it.


  • 100% Bolt On - Spindle kit that DOES NOT extended the track width 
  • Front differential is dropped a full 7” to maintain proper CV axle angles 
  • Impact struts to distribute front suspension impact loads through frame 
  • No rear add a leaf makes for easy installation and factory ride quality 
  • Utilizes the factory front bump stops for superior ride quality 
  • Semi Gloss black powder-coat for a long lasting great look 
  • Fabricated Steel Blocks (Non Casted) w/ Grade 8 U Bolts 
  • No cutting on front differential or factory bump stops 
  • Cross-members are constructed of 1/4 “ thick steel 
  • Lifetime Warranty against manufactures defects 
  • No front drive shaft required on Duramax models 
  • No exhaust modification required


  • 85102 2001-2010 7" 4WD SILVERADO / SIERRA 1500HD / 2500HD / 3500HD NON DUALLY
    • C8510-4 Component Box 1 With Hardware
    • CBK25-500F 5” Flat Rear Block Kit
    • C8510-8 HD Spindles

Recommended Tire Size:

  • 35“x 12” or 37“x 10”
  • Required 17” or larger Wheel with no more than 5” Backspace

DmaxStore Note: You will need to reuse your existing hardware for the U-bolts.