Industrial Injection LB7 Performance R3 40% Over Injector

Part# 0986435502-R3

$365.71 +$75.00 core charge (refundable)

WARNING: Cancer and Reproductive Harm - www.P65Warnings.Ca.Gov

Industrial injection LB7 Performance R3 40% Over Injector

Fits 2001-2004 LB7 Chevy / GMC 2500HD / 3500HD

Part# 0986435502-R3

*NOT LEGAL FOR SALE OR USE IN CALIFORNIA. THE MANUFACTURE, SALE, OFFER FOR SALE, OR INSTALLATION OF THIS PRODUCT MAY ALSO BE ILLEGAL NATIONWIDE UNDER THE FEDERAL CLEAN AIR ACT (42 U.S.C. § 7522(A)(3))*

*This product is ONLY designed for closed course racing where it is legal to do so. Any other use will be in violation of local, state, and federal laws. We are not responsible for unlawful use of this product.*

The Industrial Injection 40% over Race 3 Injectors start out as a genuine stock remanufactured injector from the factory then have been extrude honed and balanced to a perfect matching set injectors that flow 28LPM. The Race 3 40% over injectors should be ran with an upgraded turbo or compound turbo setup to run more efficiently and to help reduce EGTs. Also recommend a CP3 upgrade like the 85% over Dragon Fire Pump or Dual CP3 Kit. We typically see a 1-3MPG increase in fuel economy. This is a 100% OEM Reman Injector directly from the factory themselves simply sold and modified by Industrial Injection.

Features:

  • Performance Injector

  • Better Fuel Economy

  • 40% Over / 28LPM

  • 1 year Unlimited Mileage Warranty

Notes:

  • Injectors come with a new copper crush washer and o-rings for installation. Injectors are an OEM Genuine part that is a direct replacement injector. 

  • Each injector has a $150 core charge and is fully refundable if they are shipped back within 45 days.

  • All Industrial Injection / OEM products are covered by a one year/unlimited mile warranty.

  • Injectors sold individually.

  • Fuel Lines MUST be replaced or sent in for cleaning to retain warranty. 


When replacing the injectors in your LB7 Duramax we highly recommend replacing the injector fuel lines to avoid new injector contamination. The most common failure of new injector installations is contamination and the problem that we see most on these comes from the fuel lines. 

*All Industrial Injection Performance Products Are Not Legal For "On-Road", "Off-Road", or "Dual-Use". These Products May Only Be used In "Competition-Only" Vehicles. Compliance With State And Federal Emission Standards Is The Consumer's Responsibility.

Replacement injector line retainer clip and injector line retainer bolt available separately.