Gen-Y Boss Weight Distribution Torsion Drop Hitch

Part# GH-1XXX

$665.99

WARNING: Cancer and Reproductive Harm - www.P65Warnings.Ca.Gov

Gen-Y Weight Distribution Torsion Drop Hitch

Fits 2", 2.5", or 3" Receivers

Part# GH-1XXX

If you already have a weight distribution set-up and are just looking for a new hitch for it, look no further. The Gen-Y Weight Distribution Torsion Drop Hitch is compatible with almost any existing weight distribution head assembly. This hitch comes in either 10K, 16K, 21K and 2″, 2.5” or 3″ receiver sizes.

Safety

With Rubber Torsion Hitches, only 10% of the trailer inertia transfers, compared to 100% using a hard connection hitch giving you the ultimate control

Ultimate Control

The tow vehicle and trailer track independently which gives you greater control and added safety by reducing trailer sway/bounce

Greatly increased braking control since all the weight on the tow vehicle and trailer is distributed evenly giving you increased positive contact when braking and maneuvering

Safeguards Against Uncontrollable Road Conditions

Bumps, potholes, expansion joints, curves, hills, and other drivers can be a hazard, keeps you under control when confronted with these conditions

Saves Gas and Tire Wear

The 90% smoother ride allows you to glide instead of bounce increasing gas mileage

Saves You Money

Reduces trailer and content fatigue. Metal fatigue caused by traditional towing results in your trailer and its contents taking a beating. Products increase life and help hold value

Arrive Alive

Reduces driver fatigue to help ensure everyone and everything arrives alive

 

Features:

  • Drop/Raise Range: 6.5" - 17.5"

  • Fabricated with Heavy Duty Steel

  • Heavy Duty Rubber Torsion Flex Cords, Eliminates Shock Transfer

  • 2-Steel 1" Grade 8 Pivot Bolts

  • Precision Milled and Drilled

  • Easy One Pin Adjustment

  • No Airbag to Maintain, No Bearings to Crush or Wear Out, Virtually Maintenance Free

  • Built-In Mechanical Tongue Weight Scale for Balanced Safe Loading

  • 16,000LB or 21,000LB Towing and 1,700LB or 2,400LB Tongue Weight

  • Engineered Using Solidworks, The World’s Most Recognized Engineering Software

  • Design & Utility Patents Pending

  • Protected under Patent # 9,505,281 B1 & US D773,345S

 

All Gen-Y products are rigorously tested and exceed the SAE-J684 Weight Testing Requirements. Never exceed recommended capacity on any trailer tow coupling or vehicle receiver hitch.

10 Year Warranty on All Moving Parts — Lifetime Guarantee on Rest of Components — Made in the USA

 

What Size Drop Hitch do I need?

This is typically the big question and can vary depending on your trailer. Ideally, you want your trailer to sit behind your vehicle as level as possible when connected. The easiest way to figure this out is to measure the difference from the bottom of the trailer tongue(level) to the inside bottom of your hitch. The difference is the approximate drop you should try to get close to.

If you are not sure of your trailer height, then 15-17" off the ground is an average height for most trailers to use. Again, measure tow vehicles hitch opening. Then the appropriate drop is the difference between that and approximately 16". Example, your vehicle measures 19.5", then go with a 4" drop, that get you close to the middle between 15"-17".

 

Part# GH-1002 - 2" Receiver, 10K, 6.5" Drop, 6 Adjustable Positions

Part# GH-1003 - 2" Receiver, 10K, 9.5" Drop, 10 Adjustable Positions

Part# GH-1202 - 2" Receiver, 16K, 6.5" Drop, 6 Adjustable Positions

Part# GH-1203 - 2" Receiver, 16K, 9.5" Drop, 10 Adjustable Positions

Part# GH-1402 - 2" Receiver, 16K, 12.5" Drop, 6 Adjustable Positions, comes with Stabilizer Kit (Part # GH-0100)

Part# GH-1403 - 2" Receiver, 16K, 16.5" Drop, 10 Adjustable Positions, comes with Stabilizer Kit (Part# GH-0100)

Part# GH-1102- 2.5" Receiver, 16K, 6.5" Drop, 6 Adjustable Positions

Part# GH-1103 - 2.5" Receiver, 16K, 9.5" Drop, 10 Adjustable Positions

Part# GH-1302 - 2.5" Receiver, 21K, 7" Drop, 8 Adjustable Positions

Part# GH-1303 - 2.5" Receiver, 21K, 13.75" Drop, 12 Adjustable Positions

Part# GH-1502 - 2.5" Receiver, 21K, 15" Drop, 8 Adjustable Positions, comes with Stabilizer Kit (Part# GH-0100)

Part# GH-1503 - 2.5" Receiver, 21K, 22.75" Drop, 12 Adjustable Positions, comes with Stabilizer Kit (Part# GH-0100)

Part# GH-1802 - 3" Receiver, 21K, 7" Drop, 8 Adjustable Positions

Part# GH-1803 - 3" Receiver, 21K, 13.75" Drop, 12 Adjustable Positions

 

Note: Hitches do NOT come with any accessories unless where noted.