Fleece Performance Allison Transmission Cooler Lines, 2001-2005 LB7/LLY

Fleece Performance Allison Transmission Cooler Lines, 2001-2005 LB7/LLY

Part# ‍FPE-TL-LB7-LLY

$269.00 Includes Free Shipping.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.Ca.Gov

Fits: 2001 thru 2005 Chevy Silverado/GMC Sierra 2500HD/3500HD LB7/LLY Duramax Diesel

Fix your leaking transmission lines with these heavy duty, high flow, flexible transmission lines. This kit comes complete with everything needed to get the job done right the first time.

Features:

  • High Flow & Flexible
  • AN Fittings
  • OEM Fitment

Includes:

  • Transmission Lines
  • 6 x 7/8"-14 O-ring to -10AN fittings
  • 2 x 3/4"-16 O-ring to -10AN fittings (LB7-LLY kit only)
  • 4 x Black Zip Ties
  • 2 x Concave washers
  • 2 x Setrab fittings(fits aftermarket radiators only)

Notes: 

  • Consider running heat shielding on the lines. Heat is the enemy of transmissions and our kit was designed to specifically work WITH the Fleece Transmission Line Kit. Part# DMAX-TCLHS-KIT

Replaces Part#:

  • GM 15170217, 15170215, 15170219

INSTALL INSTRUCTIONS

Customer Reviews

Based on 12 reviews
92%
(11)
8%
(1)
0%
(0)
0%
(0)
0%
(0)
T
Thomas
Easy install good quality

Easy install good quality paired mine up with the max flow trans cooler only downside is it runs close to my 4” exhaust by the tranny but have not had any heat or leakingnissues

A
Adam
Lines are very high quality with nice AN fittings attached

Lines are very high quality with nice AN fittings attached. Lengths were perfect. I wish instructions gave a better view of routing for the lines though. A lot of moving parts around this area that could easily cut a line and lose all your fluid.

S
S.D.

Great product and very well made and shipped fast and easy installation instructions

Z
Zach Buffington
Fits 8.1 with minor modification

Bought for 2001 Silverado 2500hd ecsb Allison transmission, 4x4, 8.1 vortec. The fitting the goes into transmission is about 1/2” from the exhaust right at the elbow of the fitting. Then I had an aftermarket cooler so I had to notch out a section of the radiator support or front assembly frame. Not sure what to call it. Right where the line comes out of the cooler on the passenger side it goes directly straight down. Might work with a stock cooler. I imagine it is the same with the duramax. Literally the same truck except for the engine and torque converter. Not sure why that wasn’t worked out. But very minor trimming and fits perfectly.

J
Jeremy Williams
I sell this to all my dmax customers

Great lines a lot easier to install than the hard rigid lines and will last longer.

123