Fleece CP3 Conversion Kit with Heavy Duty CP3 Pump, 2011-2016 LML

Part# ‍FPE-LML-CP3-10

$2,599.00 Includes Free Shipping.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.Ca.Gov

Fits: 2011 thru 2016 Chevy SIlverado/GMC Sierra 2500HD/3500HD LML Duramax Diesel

Improve your LML Duramax's reliability and fueling capability with a CP3 conversion. Since its introduction, the CP4 has proven to be less reliable and less capable than the CP3 used in previous Duramax platforms. Failures of the CP4 are extremely costly and require the replacement of the entire fuel system. Fleece's kit provides you with OEM fit-and-finish features like a brand new Bosch CP3 with heavy duty 10mm cam, Fleece exclusive molded hoses for the fuel feed and return, high flow CP3 fuel fittings, and our valley feed line to support aftermarket lift pump applications.

Features: 

  • Improved reliability 
  • Improved fueling capabilities 
  • Heavy Duty CP3 with 10mm displacement cam
  • High flow CP3 feed and return fittings
  • Preformed feed and return fuel hoses

Includes:

  • Heavy Duty CP3 with 10mm displacement cam
  • CP3 to rail high pressure fuel line
  • High flow CP3 feed and return fuel fittings
  • Preformed feed and return fuel lines
  • CP3 mounting adapter
  • Dosing injector feed line
  • FCA extension harness
  • Fuel temperature sensor mounting bracket
  • Low pressure fuel feed lines
  • Hardware kit

Optional:

Notes:

  • This kit has been tested for use in stock application trucks that did not utilize a fuel lift pump. For optimal performance, if the truck is equipped with a lift pump, the feed pressure to the CP3 should not exceed 2 psi. Engine surging may be induced by the additional fuel pressure of a lift pump operating at pressures over 2 psi. Engine surging may be induced by the additional fuel pressure of a lift pump operating at pressures over 2 psi. If you are intending to combine this kit with a Fleece PowerFlo lift pump, contact us for a lower rate spring for your pump to accommodate operation with this kit. For higher lift pump pressures, FCA table values will require adjustment. Covered under SC-E Emissions certificate #: SC-FLC01-0013
  • THE MANUFACTURE, SALE, OFFER FOR SALE, OR INSTALLATION OF THIS PRODUCT IS NOT LEGAL IN CALIFORNIA.

Install Instructions