BD Diesel Xtruded Transmission Oil Cooler (LB7-LMM)

Part# 1030606-5/8

$699.95

WARNING: Cancer and Reproductive Harm - www.P65Warnings.Ca.Gov

BD Xtruded Transmission Oil Cooler (LB7-LMM)

Fits 2001-2010 Chevy/GMC  2500HD/3500HD

Part# 1030606-5/8

BD’s Xtruded Transmission Oil Coolers uses the same high efficiency Micro Extruded bar technology that is in our air-to-air Charge Air Coolers, providing 22% more cooling over other designs. The 200 Micro Extruded passages provide a large surface area to transfer heat for external air flow cooling while turbulent oil flow design promotes a more complete cooling. Large 5/8-inch ports prevents inlet/outlet restriction and furnace brazed rails have been tested to 300 psi of pressure. The thermostatically controlled 80-watt, 10-inch, 800 CFM electric fan offers ultimate automatic oil temperature control. This combination gives BD’s Xtruded Transmission Oil Cooler a rating of 33,930 BTU/HR and in excess of 30,000 GVW! Xtruded Transmission Oil Cooler packages are available to accommodate 5/16, 3/8, 1/2 and 5/8 transmission cooler lines and come complete with all fittings, clamps, hoses, hardware and a Build-It-Yourself galvanized bracket kit for quicker and cleaner installation – no wasting time fabricating brackets out of scrap metal. The pre-wired loomed harness with fuse and relay comes with OEM style sealed connectors to resist elements and give factory-like install look.

Features:

  • 22% more cooling over other designs

  • 200 Micro Extruded passages

  • Large surface area to transfer heat for external air flow cooling

  • Turbulent oil flow design promotes a more complete cooling

  • Large 5/8-inch ports prevents inlet/outlet restriction

  • Furnace brazed rails have been tested to 300psi of pressure

  • Thermostatically controlled 80-watt, 10-inch, 800 CFM electric fan

  • 33,930 BTU/HR and in excess of 30,000 GVW!

  • Kits complete with all fittings, clamps, hoses and hardware

  • Build-It-Yourself galvanized bracket kit for quicker and cleaner installation - no wasting time fabricating brackets out of scrap metal

  • The pre-wired loomed harness with fuse and relay comes with plug-in connectors

  • Chevy Allison 1000 - 5/8-inch Cooler Lines

Parts Warranty

  • 12-Months

  • 24,000 Miles

DmaxStore Notes:

  • Intended to be used in conjunction with factory transmission coolers and not as stand-alone units

  • When replacing the transmission cooler, you will lose about 1-2 quarts of transmission fluid. We recommend using Transynd Transmission Fluid