PPE LBZ/LMM Dual Fueler Kit with CP3 Pump 113063500

PPE Dual Fueler Kit with CP3 Pump, 2006-2010 LBZ/LMM

Part# ‍113063500 + 113061071

$2,249.99

WARNING: Cancer and Reproductive Harm - www.P65Warnings.Ca.Gov

Fits: 2006 thru 2010 Chevy Silverado/GMC Sierra 2500HD/3500HD LBZ/LMM Duramax Diesel

By simply bolting this kit on, your engine computer will automatically recognize both pumps and continue to deliver the precise amount of fuel your engine computer is requesting. Our additional PPE belt-driven Bosch CP3 fuel pump works in conjunction with the stock fuel system and is controlled by a sophisticated microprocessor module.

Adding our kit to your stock fuel system reduces drive load on the stock CP3 pump, thereby increasing pump reliability. Both pumps work together, each delivering half the total volume of fuel required. In the event of one pump failing the electronic controller will automatically switch all fuel delivery responsibilities to the remaining operational pump.

This kit will not produce more fuel pressure than the engine ECU requests; it will only increase fuel volume as needed to maintain ECU requested fuel pressure. For racing applications this kit provides fuel flow to maintain fuel pressure to 26,000+ psi that is essential for highly modified race engines that are seeking to produce up to 2,000+ hp.

Features:

  • Provides additional horsepower and fuel pressure

  • Easy bolt on installation

  • CARB approved

  • 50 State Legal CARB EO#D-701-22

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
D
DuraDallas
Install wasn't too bad

Install wasn't too bad.I suggest you reroute the fuel return line that goes between the Y bridge and the turbo if you are replacing the older cp3 in the valley. Other than that the glow plugs controller can be mounted up to the firewall using the hood grounds 10mm. That way the new fuel block and hard lines clear.
This is the newest version so you don't have to shim up the mount to get the belt alignment straight. Also check the new ripple on the new fuel return block because it will need to be tightened more.