FTS 7" Lift Kit 2011-2019 GM 2500HD - 3500HD

Part# 46104/46109

$2,453.98 Includes Free Shipping.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.Ca.Gov

Full Throttle Suspension 7" Lift Kit

Fits 2011-2019 Chevy/GMC 2500HD / 3500HD

Part# 46104/46109

Free Standard freight is only to the lower 48  states.  International, HI, and AK, orders will require an additional shipping charge before order is shipped.

This FTS 7" Suspension Lift Kit carries a lifetime warranty against any manufactures defects.  FTS uses a 100% bolt on kit that does not extend the track width of the front suspension, by dropping the front differential FTS is able to maintain the proper CV axle angles to ensure smooth and reliable operation.  Fabricated steel blocks lift up the rear of the truck utilizing grade 8 u-bolts for straight forward installation. The high quality gloss black powdercoat will look good and hold up to just about anything you can throw at it.


  •  100% Bolt On 7” Spindle Kit
  • Structural Cross Members Constructed Of 1/4" Thick Steel For Superior Strength
  • Utilizes Ductile Iron Steering Knuckle For Stock Alignment
  • Superior Drivability Both On And Off-Road
  • Option To Use Your Kit With Or Without Torsion Bar Drops
  • Only Increases Track Width By 1/2'' Per Side
  • All 4 Factory Bump Stops Incorporated For Durability
  • Front Differential Dropped Full 7'' For Flat C/V Angles
  • Differential Skid Plate Keeps Your Diff Away From Debris
  • Heavy Duty Semi-Gloss Black Powder For Long Life And Great Looks
  • Impact Struts To Distribute Suspension Impact Throughout The Frame
  • Less Cutting Of Factory Frame And Differential Then Other Kits 


  • 46104 2011-2019 7" 4WD SILVERADO / SIERRA  2500HD / 3500HD
    • C4600-4 Component Box 1 With Hardware
    • C4600-7 Component Box 2 With Hardware (includes the 4.5" rear blocks)
    • CH46007 Hardware
    • CH46004 Hardware
    • C4600-10 HD Spindles

Recommended Tire Size:

  • 35“x 12” or 37“x 10”
  • Required 17” or larger Wheel with no more than 5” Backspace

DmaxStore Note: You will need to reuse your existing hardware for the U-bolts.